|
|
|
|
On all 801-series gauges, the engraved plastic front panel / lens assembly is mounted on the outside of the panel, and the printed circuit assembly of the gauge is mounted behind. Attractive stainless steel hardware holds the assembly.
The 810-2
is a new Wide-Range Dual controller
and Gauge which replaces the discontinued Varian 810-2 dual
controller. It is superior to the Varian in that it
reads all the way from atmosphere to 1 millitorr.
Easily mounts on enclosure doors - less than 2 " deep!
Has two 240 volt 7 amp Spdt relays, Rs232,
and linearized analog output. less than half the cost! Gauges work on either 115 or 208/230 VAC 50/60 Hz by terminal strip connection. Because of their simple, single-circuit board design, the 801/DVG-6 are the most cost effective of our gauges. They are widely used in new OEM applications such as freeze dryers and vacuum ovens. For the most compact gauge, choose the Model 100P. For information about tubes available, see the Model 100. They are available in all of the standard ranges: 0 to 1999 microns 0 to 199.9 microns 0 to 19.99 torr 0 to 760 torr 0 to 199.9 torr 0 to 29.9 in. Hg 0 to 15 Psia 0 to 15 Psig 0 to 150 Psia/Psig
The logos and/or trademarks appearing on this page are not owned by or registered to Innovac Inc. but, rather, designate products sold by Innovac Inc. , and are owned and/or registered to the manufacturers or suppliers of the products |
|
Send mail to
Webmaster@innovacinc.com with questions or comments about this web site.
|
